Icom_VE-PG3_OPC-2274_connection_cable_使用说明书手册

INSTRUCTION MANUALCONNECTION CABLEThank you for purchasing this lcom product.The OPC-2274 CONNECTION CABLE is used to connect aOPC-2274repeater to the VE-PG3READ ALL INSTRUCTIONS carefully and completely before using the cable.CONNECTING THE OPC-22741Set the repeater channel.TX output power,and other necessary settings.(See the repeater and the VE-PG3 instruction manuals for setting details.)2Turn OFF both the repeater and the VE-PG3,and then connect the OPC-2274,as shown below.Icom's repeaterVE-PG3 (Rear view)(IC-FR5000/IC-FR6000 series)血面可®To [TRX1](Upper slots)To the accessory connectoBe sure to insert theconnectors top side up.日■TRX1ABTopBottom0PC2274.The [TRX1]and [TRX2]ports (upper slots)accept the OPC-2274 connectors,however,follow the example to correctly connect the repeater to ONLY the [TRX1]on the VE-PG3.CAUTIONVerify that both the repeater and the VE-PG3 are turned OFF when connecting or disconnecting the cable.Hold the connector body when connecting or disconnecting themWhen other cables are connected,you canuse needle-nose pliers to carefully insert orremove connectors.Neede-nose pliersConnectorbodyNEVER pull the connector by holding thecable.This will damage the cable.*If the cable becomes damaged,replace theconnector(s).See "REPLACING THECONNECTOR"on the reverse side forVE-PG3(Rear view)replacement details.Never bend or pinch the cable.Never place a heavy object on the cableNever touch the cable with wet hands.Always connect the cable correctly.An incorrect connection could damage the VE-PG3 and/or the repeater.