八重洲Yaesu_FP-30_user操作说明书手册

YAESU FP-30AC POWER SUPPLYfor the FT-897 HF/VHF/UHF TransceiverThe FP-30 is an internal AC power supply for use with the FT-897 HF/VHF/UHF Transceiver,providing 13.8Volts DC at up to 22 amperes for extended periods.Excellent regulation and conservative design assure theowner of many years of trouble-free operation.SpecificationsInstallationDC Output Voltage:13.8 VBefore connecting the FP-30 to any power source,be abso-DC Output Current:11.5 A(Max.22 A)lutely certain that the voltage specification on the rear panelInput Voltage:AC200-240V-,50-60Hzmatches your local supply voltage.The FP-30 is manufacturedCase Size (W x H x D):185 x 39 x 219 mmfor use around the world,from a variety of power sources,andWeight (Approx.):1.7 kgthe wiring must be connected properly to prevent damage to theSpecifications are subject to change without notice or obliga-internal circuitrytion.1.Turn the transceiver's power off,and disconnect all cablesSupplied Accessoriesfrom the transceiver.AC Power Cable2.Remove the six screws (three screws on bottom side andSpare Fuse (6.3A).rear side),then lift off the bottom cover(Figure I and 2).Spare Screws (M3x6B)............63.Attach the FP-30 to the bottom of the FT-897,then affix itOperating Manual (this sheet)in place with the six screws removed in the above step(Fig-ure 3).4.Connect the 6-pin Molex plug from the FP-30 to the INPUTjack on the rear panel of the FT-897(Figure 4).5.Make sure that your AC voltage is correct and that the FP-30 POWER switch is set to Off;connect the AC power cablebetween the INPUT jack on the rear panel of the FP-30 anda nearby AC wall outlet.OperationTo turn the transceiver on,turn on the POWER switch onthe FP-30 before turning on the POWER switch on theFT-897.To turn the transceiver off,turn off the POWER switch onthe FT-897 before turning off the POWER switch on theFP-30.When you do not use the FP-30 with the FT-897 for along time,disconnect the AC plug from the AC wall outlet.AWARNING!Do not splash the water to the transceiver body.Also,do not place the object which is contained the lig-uid on top of transceiver such as a flower vase.Always uses the 6.3 A Fuse in the fuse holder on theY5RTEXsTANDARC9eRe4.mprear panel.Do not use the improper fuse.VERTEX STANDARDDo not allow any metal objects to short the terminals in0 aretCypresC UAthe slits of the FP-30(electrical shock hazard!).YAESU EUROPE B.V.P.O.Box 75525,1118 ZN Schiphol,The NetherlandsYAESU UK LTD.Unit 12,Sun Valley Business Park.Winnall CloseWinchester,Hampshire,S023 OLB.U.KVERTEX STANDARD HK LTD.ceUnit 5,20/F.,Seaview Centre,139-141 Hoi Bun RoadKwun Tong,Kowloon,Hong KongVERTEX STANDARD(AUSTRALIA)PTY.,LTD.Normanby Business Park.Unit 14/45 Normanby RoadNotting Hill 3168,Victoria,Australia