Downloaded byRadioAmateur.EUICOMUT-16VOICE SYNTHESIZER UNITINSTRUCTION MANUALThank you very much for purchasing our product.Voice synthesizer unitR18:Variable resistor for volumeThis is an optional voice synthesizer unit designed for ICOMtransceivers IC-27A/E/H and IC-47A/E.Please read all the instructions carefully before installation soyou will get maximum performance and full value from eachset and be able to use it as long as possible.P2-.J5ASSEMBLY PROCEDURE1)Remove the top cover by unscrewing the four screws.P1→J63)Add the cord.o An unconnected lead wrapped in a vinyl tube (brown)is placed where it is shown in the photo,then plug itinto the pin "1"of J4.(Unplug the connecter oncebefore plugging in the lead.)4)Insert the connecters P1 and P2 from the unit into theconnecters J5 and J6.P2Pin 12)Install the unit onto the spot as shown in the photo belowo Adhesive is applied on the sponge on the back of theunit,so remove the thin sheet from over the adhesiveOPERATICN AFTER INSTALLATIONto attach it.o When the SPEECH button on the front panel is pushed,itwill verbally announce the displayed frequency in English.For example:In case of 145.68MHzDisplay:Unit to be placed here845.bBAnnmouncement:"One""Four""Five""Point""Six""Eight"o While the volume of the announcement is adjustable withthe volume control on the front panel of the transceiver,ional cordyou can also adjust it with R18 in the unit if you wantmake it louder or smaller against the receiving sound.ICOM INCORPORATED1-6-19,KAMI KURATSUKURI.HIRANO-KU.OSAKA JAPAN
请登录后查看评论内容