Life-Smart-MLI-15STD-Operations-Manual操作与维护保养说明书手册

Operator's ManualPart Number M00970AMLI Industrial Pro SeriesBEFORE OPERATIONDURING OPERATIONFollow these safety rules before operatingFollow these safety rules while operatingthe material lift:the material lift:ALWAYS position the material lift on a firm,NEVER operate the material lift near powerlevel surfacelines.ALWAYS ensure that no part of theALWAYS inspectmaterial lift can accidentally reach into anunsafe area.the work area forpotential hazardsADANGERsuch as overheadobstructions,The material lift is NOT insulated for useunstable or slipperynear electrical power lines and DOESsurfaces,drop-offs,NOT provide protection from contactholes,debris orwith or proximity to any electricalmoving vehiclescurrent.Maintain safe distances at allALWAYS inspect the equipment beforetimes (minimum 3.05 meters;see chartoperating the material lift.Check forbelow).Allow for mast movement ordamaged or worn parts.NEVER operate aelectrical line sway due to environmentalmaterial lift if any damage to the equipmentconditions.ALWAYS assume everyis observed or suspected.ALWAYS tag apower line is live.damaged material lift and remove it fromservice until repairs are completedVoltage RangeMinimum Safe Approach Distanceaccording to manufacturer's specifications.(Phase to Phase)FeetMetersALWAYS inspect the winch and cable0 to 300VAvoid Contactbefore operating the material lift.Check forOver 300V to 50KV103.05wear,frays,kinks and damage to the cable.Verify that the cable is wrapped around theOver 50KV to 200KV154.60winch drum at least four times when theOver 200KV to 350KV206.10carriage is lowered.NEVER operate aOver 350KV to 500KV257.62material lift if any damage to the winch orOver 500KV to 750KV3510.67cable is observed or suspected.Over 750KV to 1000KV4513.72NEVER repair the material lift in any wayother than according to manufacturer'sALWAYS keep awayspecifications.from a material liftNEVER deface,modify or obscure anythat is exposed todecals or markings on the material lift.energized powerlines.If the materialNEVER modify the material lift in any waylift contacts energizedthat would affect its oriainal desian orpower lines,NEVERoperation.touch or operate theNEVER operate the material lift in any waymachine until powerfor which it is not intended.lines are shut off.2Copyright 2012 LiftSmart