A200_IM操作说明书手册

COM1C-A200INSTALLATION INSTRUCTIONSIMPORTANTINSTALLATION PROCEDUREREAD THESE INSTALLATION INSTRUC-TIONS CAREFULLY before attempting to installInstall the IC-A200 according to the following procedure.the IC-A200 in an aircraft.This sheet contains importantCheck the quantity of parts.Refer to UNPACKING.safety instructions for the IC-A200.②Prepare miscellaneous items required for instal-lation.Refer to MISCELLANEOUS ITEMS.NEVER install the transceiver where normal navi-3Prepare required wiring.Refer to MOLEX CONNEC-gation of the aircraft may be hindered.TOR ASSEMBLY,COAXIAL CABLE ASSEMBLY andWIRING.NEVER install an antenna near any aircraft projection.Assemble supplied mounting bracket and otherengine,or propellerparts.Refer to RACK MOUNT ASSEMBLY.Cut the mounting hole.Refer to MOUNTING HOLE.INSTALL a circuit breaker between the aircraft battery④Mount the IC-A200 into the mounting bracket.Referand the IC-A200.to RACK MOUNTING.⑦Check the IC-A200 operation.Refer to OPERATIONNEVER install the transceiver in an aircraft with a 24 VCHECK.battery.The transceiver operates with 13.8 V DC.Set protect channels,if required.Refer to MEMORYPROTECTION.Check operation after installationProtect channel content CANNOT be changed by acustomer.UNPACKINGThe following parts are supplied with the IC-A200Make sure you have received all parts and that there isInspect the quantity of each part carefully.no shipping damage.①②③④⑤⑥⑦⑧⑨⑩①②0冒④⑤⑥⑦口①Mounting bracket....Nut (No.6)........Molex connector (4338-15).1①Screw(N0.6×1/2)Molex terminals (4366-GL).........30.6④Screws (No.4X1/2)...Crimp nuts(N0.6)…Screw(No.6×1/2)..⑤BNC L-shaped antenna connector.................set46⑥Washer (lcom washer V)...1COMM1 StickerCOMM2 sticker....⑦GFuses (5 A).......C-shaped ring...Antenna cable clip.1Molex polarizing key....2⑨Self-crimping nut (No.6).