Nilfisk_SC250_操作与维护手册

Use and maintenance-SC250ATTENTION!Do not use the machine before you have read and understood the Instructions for use manual1.Disconnect the battery charger2.Fil the solution tank with clean3.The tank cap can be used for4.Adjustthe handle to the desied5.Lift the pedal to lower the machinecable from the electrical main.water.The dlean water temperatuedosing the detergent.One full capheightand start working.must not exc0ed40℃.Tum on the machine with the mainthe6 L tank capacity.们DutIon06.Grab the handes to activate the7.Press the soution button,accoding 8.For sweeping functons,the 9.For double sorubbirpress the10.Turmn off the machine with the mainbrush and sdution flow,then startto the type of ceaning to beright lever to lift the front squeegeebution to switch off the vacuum.dleanng the floor.perlormed.in order to collect lght debris.At the end of the work11.For the transportation and the11.Empty the recovery and solution12.Wash with clean water the cover 13.Check and dean the solution and14.Remove the squeegee.parking of the machine,pushtank.Clean mhem with walerand the vacuum grid.vacuum fier requan.Unscrew by tuming the knobdow e pedalclockvise to remove thecyfindrical brush.nandleoan.15.Clean the squeegee and the cyfin-15.Clean the debris colection tray16.Clean the machine using a damp17.Charge the batteres:Comect the18.Then stove the machine in a cleandrical brushcbth and where needed use a neubattery charger cable from theand dry place.talc生aning product..electrical msn.ALWAYS FOLLOW THE DETERGENT DOSING RECOMMENDATION ON THE LABEL OF THE CHEMICAL PRODUCT USED.