IC-9700_ENG_Info_V110_0

INFORMATIONVersion 1.10The following features are changed in or added to the Set mode.■Set mode■REF adjustmentThe following items are added to the Set mode.[AUTO ADJ]on the "REF Adjust"screen is changedto [Sync to REF IN].MENO》SET>FunctionWhile synchronizing to REF IN,automatically adjuststhe intemal reference frequency to match the extemalHome CH Beep(Default:ON)10 MHz reference frequency.Tum the Home CH Beep ON or OFF.D In the VFO or Memory mode,when the Home Channel1.Apply a highly accurate and stable 10 MHzfrequency or the Home Channel Memory is selected,thereference frequency signal to the [REF IN 10MHz]Home CH Beep sounds.connector.D In the DR screen,when the Home Channel Access2.Open the "REF Adjust"screen.repeater is set in FROM.the Home CH Beep soundsMENU>SET Function REF Adjust·OFF:No beep sounds.·ON:Sounds a beep when you select the Home3.Touch [Sync to REF IN].Channel.MENO》SET>SD Card47(FINE)Save Form(Default:Now Ver)49%Selects the format to save the settings to an SD cardSync to REFGNow Ver:Saves the settings in thecurrent version format.Touch[START]Old Ver (x.xx -x.xx):Saves the settings inan older version formatindicated in the parenthesisInput Reference signal (10 MHz).Start syncing now?(X.Xx=version)】If you selectOld Ver (x.xx x.xx),"a function that isadded when the transceiver's firmware format is updatedSTARTGANCELwill not be saved.D You cannot load a setting file that is saved in the currentversion format to an earlier firmware version."Synchronizing.Please wait..."is displayed.and "Synchronized."is displayed when theSynchronization is completed.5.Push EXIT several times to close the REF Adjustscreen.①Information.While synchronizing."REF Adjust(Synchronizing to REFIN)"is displayed,and you cannot manually adjust theinternal reference frequency.FUNCTION99Screen Capture File TypePNGREF Adjust(Synchronizing to REF IN)■42%78%(FINETo cancel the REF IN synchronization,touch[Cancel Sync]in Step 3.The REF IN synchronization is not automatically canceled,even if you turn OFF the transceiver,then turn it ONagain.NOTE:Sudden changes of temperature,for examplewhen you turn ON the transceiver,or start transmission,may cause the transceiver to take a longer time tosynchronize.