67RTJoperations操作与维护手册

HT23RTJ O-HT23RTJ O SW-HT67RTJ O HT23RTJ PRO-HT23RTJ PRO SW HT67RTJ PROHaulotte>》Operation instructions1-Operation1.1-INTRODUCTIONOnly trained and authorized personnel shall be permitted to operate this aerial work platform.Prior to operationRead,understand and obey all instructions and safety precautions in this manual and attached to theaerial work platform.Read,understand and obey all Federal,State and local codes and regulations.Become familiar with the proper use of all controls and emergency systems.1.2-MAJOR DESCRIPTIONAll the machines are equipped withPlatform control box.Ground control box (Auxiliary power and overriding system).Stop Emission System.1.3-OPERATION FROM THE GROUND CONTROL BOXThe ground control box is designed for maintenance and emergency rescue operations only.Turning ON/OFF is performed with engine start-up selector(16)after the control box activation keyswitch 22 is tumned to the ground control box position.Activation of a desired control box is achieved by turning the Control box activation key switch(22to the desired positionThe ground control box is energized and is active ONLY whenThe E-stop buttons on both ground and platform control boxes are not pressed in(Deactivated).To switch ON the machine,turn the Control box activation key switch 22 at the ground control box on groundcontrol box positionAn E-Stop button at each control box stops all movements when pressed in;including shutting off anengine (if equipped).N.B.-:-DO NOT TURN OFF THE POWER SUPPLY OF THE MACHINE USING THE E-STOP BUTTON(USE ONLY INCASE OF EMERGENCY).TURN OFF THE POWER SUPPLY OF THE MACHINE USING THE CONTROL BOXACTIVATION KEY SWITCH 22 TOPOSITION.An Enable /Foot Switch(6 )is present that should be activated and maintained to authorize one ormore movements."If Enable Switch(6)is kept engaged without selecting a function movement formore than 8 seconds;Enable Wwitch is automatically de-activated".4000664900E10.18-V2USA/GB97