V5.3_Television_Test_Method

ENERGY STAR Program RequirementsProduct Specification for TelevisionsTest MethodENERGY STAR1 OVERVIEWThe following test method shall be used for determining product compliance with requirements in theENERGY STAR Eligibility Criteria for Televisions.2 APPLICABILITYENERGY STAR test requirements are dependent upon the feature set of the product under evaluation.The following guidelines shall be used to determine the applicability of each section of this document:1)Test procedures in section 6 shall be performed on all products;2)Test procedures in section 6.3 shall be performed on products without automatic brightnesscontrol (ABC)enabled by default;3)Test procedures in section 6.4 shall be performed on products with ABC enabled by default;4)Test procedures in section 6.5 shall be performed on products with download acquisition mode(DAM).3 DEFINITIONSUnless otherwise specified,all terms used in this document are consistent with the definitions in theENERGY STAR Eligibility Criteria for Televisions.4 TEST SETUPA)Test Setup and Instrumentation:Test setup and instrumentation for all portions of this procedure shallbe in accordance with the requirements of IEC 62301,Ed.1.0,"Measurement of Household ApplianceStandby Power",Section 4,"General Conditions for Measurements",unless otherwise noted in thisdocument.In the event of conflicting requirements,the ENERGY STAR test method shall takeprecedence.B)Input Power:Input power shall be as specified in Table 1 or Table 2.ENERGY STAR Program Requirements for Televisions-Test Method(Rev.Aug-2010)Page 1 of 5