FT-450_foot_kit_使用说明书手册

YAESUThe radioFT450 Foot KitThe FT-450 Foot Kit allows elevating the front panel of the transceiver for easy viewing.SUPPLIED ITEMSThe following items are shipped with this kit:Front Foot(R3086890B)2 pcs2 Front Foot Stand (R3086910C)2 pcs3 Foot Rubber(R7088070A)2pcsScrew M3x6B (U20306007)2 pcsHex Nut N3 (U60300301)2 pcsINSTALLATIONCut off the two projections on each Front Foot using a pair of wire cutters (twopoints for each Front Foot).Assemble the Front Foot and Front Foot Stands,and then affix a Foot Rubberto each Front Foot Stand.Remove the two screws from each side of the transceiver and four screws from the Bottom Case of the trans-ceiver,and then remove the Bottom Case.Remove the original Front Feet from the Bot-tom Case,by using a small pointed tool topress the center pins out of the nylon rivetsto release the feet.Install the assembled Front Feet and Standsusing the supplied Screws(M3x6B)and HexNuts (N4).Important Note!:In the above step,insertthe Screws from the inside of the BottomCase and attach the Hex Nuts from the FrontFoot side.Apply a drop of adhesive to each Hex Nut to prevent loosening.(Allow the adhesive to dry before placing the radioon your desk).Replace the Bottom Case with eight screws.The installation is now complete.YAESU MUSEN CO.,LTD.