BR1000-BenchBlotter-操作说明书手册-rev.9-15

Benchmark目Introduction:Ill.Produst Operation:Benchmark's BenchBlotter Platform Rocker is a lowLoad the plattorm from the center out,making sureprofile,quiet,large platform rocker whose speed andthe items placed on the platfomm create a balancedtilt angle have been optimized for blot washing andload around the center line of the platform.This isgel staining and de-staining.The BenchBlotterMimportant as large,overhung platform loads mayRocker is also an excellent general purpose labcause the rocker to tip over.Turn the unit on byrocker with a full 3.2kg (7.0 Ibs)load capacity andactivating the ON/OFF switch so that it isOperations Manualstacking platform and dimpled mat accessories.Theilluminated.Item:BR1000(-E)BenchBlotter Platform Rocker will operate in coldV1.0rooms downto4'℃and in incubators up to5℃.V.Accessories,stacking platforms and matsStacking platforms are available (ltem:BR1000-STACK)that allow doubling of the work area.L Specifications:There is a 7.5 cm B")separation between the twoSpeed:Fixed at 12 RPM (10rpm for 230V models)platforms,allowing access to the content of bothBenchBlotterTMTilt angle:+/8degreesfrom horizontaltrays.The stacking platform comes with a flat matAdditional dimpled and flat mats are also available.See-Saw RockerMotor:Electronically controlled brushless gearmotor(no carbon brushes to replace)Platform:30.0x 30.0 cm (12x 12")Load Capacity:23kg (5Ibs)centered and balancedDimensions:wxdxh 34.3x30.0x18cm (13.5x12x7)VI.Care and MaintenanceWeight:3kg (6.6bs)No routine maintenance is required other than toMat:Flat non-skid,black autoclavablekeep the unit clean.Cleaning can be done with aElectrical:115VAC,60Hz,0.4 amps (BR1000)damp cloth.Avoid the use of solvents as they may230WAC,50Hz,02 amps(BR1000230)damage the product housing.Operating environment:4'C(cold room)to 45CWarranty:2 yearsService and Contact:In the event that service or technical support is required,please contact Benchmarkby phone at 1-908-769-5555ll.Product Set-Up:or by email atinfobenchmarkscientific.com.Place the rocker on a clean,flat,stable surface.Makesure that the power switch is in the OFF (notilluminated)position.Plug the rocker into a properlygrounded outlet.Check that nothing blocks the upand down rocking action of the platformBenchmarkScientificP.O.Box 709 Edison,NJ 08817 USAPh:908-769-5565 EM:infoBenchmarkScientina.com