bruker-ap-maldi-source-esquire-2000-3000-ms_操作说明书手册

AP/MALDI Source for the Bruker Esquire2000/3000 Mass SpectrometerInstallation,Operation and Maintenance ManualJune,2003WarningOptical parts of the AP/MALDI source should be handled with extreme care.Touching them with bare fingers,storing them in or exposing them to dirty ordusty environments can result in permanent damage of some opticalcomponents.Be aware that the warranty does not extend to the fiber opticalcable,which requires special care during storage,installation,and operationof the AP/MALDI source.Any finger tapping,dirt deposition,or exposing to adirty environment will result in burning the fiber ends.An optical fiber isshipped with special protective caps on its ends.After removing the fiber opticprotective caps,please keep them in clean conditions and put the protectivecaps back on the fiber ends immediately after the cable is detached from aconnector or the cable is not used.If cleaning of the fiber end is requiredplease refer to the Maintenance/Troubleshooting section(Section 7)of thismanual for a cleaning procedure.It is a good idea to proceed with fiber endcleaning every time an exposure to dirt or a contamination of a fiber endsurface is suspected.In normal operation with proper care an optical fiber willhave a long lifetime.We've included a spare optical fiber cable in case yourfirst optical fiber cable is accidentally damaged.Additional fiber cables MUSTbe ordered from the AP/MALDI source manufacturer,MassTech,or your salesagent.ONLY replace the fiber with an exact replacement from themanufacturer,MassTech(Replacement Part number 6100004)For maintenance or repair please contact your sales agent or the manufacturer directly:MassTech.Inc6992 Columbia Gateway DrColumbia.MD 21046USAPhone::(443)539-1758Fax:(443)539-1759