BSH200-HL-MYBlock-Heated-Lid-操作说明书手册-rev.10-15

Operations ManualInstallation:Specifications:Item:BSH200-HLPlace the MyBlock HL on a flat and level surfaceTemp.Range:Ambient+5 to 100'CV1.0nearby an electricaloutlet.Itshould not be nearaTemp.Accuracy:-0.3*Cheat source or in direct sunlight.Temp.Increments:0.1℃Temp.Uniformity:+h-0.2*℃myBLOCK HLWarning and Hazard Signs:Block Construction:High Grade AluminumEnvironment:4℃to35CDimensions:4.4x5.9X4in.With Heated LidCaution Hot SurfaceCaution112×15×10cmWeight:2 Ibs/0.9kgOperation:Electrical:24v DC,2A converled fromAttach the power cord and place the power120Wo240V,50-60Hzswitch into the on"position.Lift the lid of the block and install theCleaning and Maintenance:appropriate block(purchased separately).The aluminum blocks can be removed for cleaningPress the "SET"key and select the desiredby using the included block lifter.Once removed,block temperature using the up and downthe blocks can be cleaned with isopropyl alcohol orarrows.can be sterilized in an autoclave at 121C for 20 min.Press the "SET*key again and selectthedesired lid temperature using the up andThe instrument can be cleaned with a damp cloth ordown arrows.isopropyl alcohol.The user is responsible for theBenchmarkThe instrument will now quickly heat to theappropriate decontamination in case of spillage ofdesired temperature.The right side of thehazardous material inside the case of the instrument.display will read 'NOT OK"until the desiredNOTE:The user is responsible for only using theIntroduction:temperature has been reached in both,thedeaning agent listed above.The use of anyThank you for purchasing the MyBlock"M HL Miniblock and lid.The display will then read "OK"decontamination or cleaning agents that could causeDryBath with heated lid.Please read this manualOnce the unit is up to temperature,load youra HAZARD as a result of a reaction with parts of thethoroughly prior to operating the instrument.samples into the block and lower the lid.equipment or with material contained in itisThe MyBlockHL is the first and only miniheatprohibited.If there is any doubtregarding theblock featuring a heated lid for protectingCAUTION:Hot surfaces,especially oncompatibility of a specific decontamination orsamples against umanted condensation andthe block,can cause serious injuryburns.deaning agent,please contact the manufacturer.evaporation.The block and lid temperature can becontrolled independently,making this MyBlockCAUTION:Do not put water or liquids intoFor additional information regarding thethe ideal choice for the most temperaturethe well as shock,serious injury and deathcompatibility of cleaning solutions or if there is anysensitive applicationsmay occur.doubt regarding the compatibility of a specificdecontamination or cleaning agent please contactCAUTION:Do not heat flammable orBenchmark Scientific IncPlease read this manual carefully prior toexplosive substances as serious injuryoperation.Any attempt to use this instrumentand death may occur.Service and Contact:that is not in accordance wi