DST570_使用者说明书手册

Digital Pocket Multi Stem ThermometerFUNCTION:[]A:ON/OFF,H/T FUNCTION.B:ON/OFF,'F/C FUNCTION.[]C:ON/OFF,MAX/MIN ('F/C)MEMORY RECALLING FUNCTIONONE-HOUR AUTO SHUT OFFFEATURE:.130MM.STAINLESS STEEL SENSOR PROBE.MAX/MIN ('F/C)MEMORY RECALLINGTEMPERATURE UNIT F/C SELECTABLEDATA HOLD/TEST FUNCTION SELECTABLE.I SEC.NORMAL TEMPERATURE SENSING TIMEPROTECTIVE PLASTIC SLEEVE WITH CLIP FOR STAINLESS STEELLOW BATTERY INDICATORSPECIFICATION:.MEASUREMENT RANGE:]-50C-+150'C OR-58'F ~+302FX50℃~+300℃0R-58F+572℉◆RESOLUT1ON:±0.PFOR-19.9°-+199.9°，0 THERWISE1°·ACCURACY±I'C IN THE RANGE OF-30C-+I50CM±I.8℉IN THE RANGE OF-22℉~+302F☑±I℃IN THE RANGE OF I5IC~+25OC,OTHERWISE MORE THAN±2C☑±1.8 F IN THE RANGE OF303.8F~+482℉，OTHERWISE MORE THAN±4℉.AMBIENT TEMPERATURE FOR PLASTIC CASING:-10C~+50C OR +14F-+122F·BATTERY:IXI.SV“393"SIZE OR EQUIVALENTINSTALLATION:UNPACK THE THERMOMETER WITH CARE.OPEN THE BATTERY DOOR,INSTALL ONE "393"SIZE OR EQUIVALENT BATTERY INTO THEBATTERY COMPARTMENT.THEN CLOSE THE BATTERY DOOR.SLIDING PLASTIC SLEEVE.THE THERMOMETER IS NOW READY FOR USE.REPLACE NEW BATTERY WHEN THE LOW BATTERY INDICATOR APPEARS ON THE SCREEN.OPERATION:“ON/OFF”.-FOR POWER SWITCHINGW℃PF”.-TO SELECT DESIRED TEMPERATURE UNIT.["HOLD/TEST"--PRESS ONCE/SLIDE THE SWITCH,"HOLD"FLASH TO RETAIN READING FOR RECORDING.["MAX/MIN"---PRESS ONCE TO RECALL MINIMUM TEMPERATURE TESTED.PRESS AGAIN FOR MAXIMUMTEMPERATURE TESTED.TESTING MODE WILL RESTORE AFTER 3 SECONDSPRECAUTIONS:TO OBTAIN THE BEST RESULTS,THE PROBE TIP SHOULD BE IMMERSED AT LEAST JOMM.INTO THE TESTEDSUBSTANCE.REMOVE THE BATTERY FROM THE BATTERY COMPARTMENT IF THE THERMOMETER WILL NOT BE USEDFOR LONG DURATION OF TIME OR DURING STORAGE.THE THERMOMETER CANNOT BE USED OR PUT INSIDE ANY OVEN OR MICROWAVE.