astmd86-99a

Designation:D 86-99a1Standard Test Method forDistillation of Petroleum Products at Atmospheric Pressure1This standard is issued under the fixed designation D 86;the number immediately following the designation indicates the year oforiginaladoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.A superscriptepsilon (e)indicates an editorial change since the last revision or reapproval.This specification has been approved for use by agencies of the Department of Defense.e'NoT-Table 9 was corrected editorially in November 1999.1.Scopeucts (Reid Method)1.1 This test method'covers the atmospheric distillation ofD 2892 Test Method for Distillation of Crude Petroleumpetroleum products using a laboratory batch distillation unit to(15-Theoretical Plate Column)3determine quantitatively the boiling range characteristics ofD 4057 Practice for Manual Sampling of Petroleum andsuch products as natural gasolines,light and middle distillates,Petroleum Productsautomotive spark-ignition engine fuels,aviation gasolines,D 4177 Practice for Automatic Sampling of Petroleum andaviation turbine fuels,1-D and 2-D regular and low sulfurPetroleum Products3diesel fuels,special petroleum spirits,naphthas,white spirits,D 4953 Test Method for Vapor Pressure of Gasoline andkerosines,and Grades 1 and 2 burner fuels.Gasoline-Oxygenate Blends (Dry Method)41.2 The test method is designed for the analysis of distillateD 5190 Test Method for Vapor Pressure of Petroleum Prod-fuels,it is not applicable to products containing appreciableucts (Automatic Method)quantities of residual material.D 5191 Test Method for Vapor Pressure of Petroleum Prod-1.3 This test method covers both manual and automateducts (Mini Methodyinstruments.In cases of dispute,the manual apparatus andD 5482 Test Method for Vapor Pressure of Petroleum Prod-procedure shall be the referee test method.ucts(Mini Method-Atmospheric)41.4 Unless otherwise noted,the values stated in SI units areD 5949 Test Method for Pour Point of Petroleum Productsto be regarded as the standard.The values given in parentheses(Automatic Pressure Pulsing Method)4are provided for infommation only.D 5950 Test Method for Pour Point of Petroleum Products1.5 This standard does not purport to address all of the(Automatic Tilt Method)safety concerns,if any,associated with its use.It is theD 5985 Test Method for Pour Point of Petroleum Productsresponsibility of the user of this standard to establish appro-(Rotational Method)4priate safety and health practices and determine the applica-E 1 Specif cation for ASTM Thermometerssbility of regulatory limitations prior to use.E77 Test Method for Inspection and Verifi cation of Ther-mometers"2.Referenced DocumentsE 1272 Specifi cation for Laboratory Glass Graduated Cyl-2.1 All standards are subject to revision,and parties toindersagreement on this test method are to apply the most recentE 1405 Specifi cation for Laboratory Glass Distillationed