H2020-H2024-Benchmark-RotoMini-操作说明书手册

Benchmark月ll.Product Set-Up:To adjust the angle of which the tubes rotate,simplyOperations ManualPlace the rotator on a clean and stable surfacerotate the position of the tube holders by hand until(Ensure that there is at least 3 inches of open spacethe desired rotational angle is achieved.Item:H2020 and H2024 (-E)V1.0both in font of and behind the instrument)Plugthe instrument into an outlet of the appropriate0.5 and 50ml Tubesvoltage.Attach the lage tubeR2020-500holder directly to theIll.Tube Holder Installation /Exchange:rotator《without post)The instrument includes an assortment of tubeInsert the holder into theholders and post在left side of the rotator firstand then into the mainALWAYS attach the tube hdlder load tubes outside6x50ml&24x0.5mlbody (right side).Onceof the incubation chamber.Once fully loaded,theninserted rotate the postload the posts with tube holders onto the rotatinguntil it is fully installed (similar to diagram above)axis.Loading tubes and tube holder within theincubation chamber may sesult in the dropping ofTo rotate tubes horizontally (rolling/hybridizationtubes and spillage on the heating surface.motionl first attach the 2 small posts to the center ofthe large tube holder.(One post has a small flat that15/2.0,5,7.10and15 nl Tubescan be inserted to comespond to the flat located inthe center of the tube holderl Thread the 2 postsR2020-1520R2020-0507R2020-150together by turning the post (without flat)clockwiseuntil fully tightener Then insert posts into therotator as described above.11x15/2.0mlSx 10/TSmineImTo load test-tubes press them firmly into theappropriate holder ALWAYS ensure a balanced loadAttach the tube holders (above)to the included postacoss both sides of the rotational axis.(Whenwith two arms.Press holders on firmly to preventmixing 15 and 50ml tubes,aleays load a similarthem from coming loose during use.Once pressedquan tity of tubes on each side of the rotational axis.)on firmly,attach the post to the rotator by insertingthe post into the left side of the rotator first and theninto the main body (right side).Once inserted,rotateI.Specifications:the post until it is fully installed,see below:Speed:H20208d240M(20M5r20V.s0H日H2024 Adjustable fom 1 to 70rpmTemp.Range:Ambient +5 to 60CTemp.Fluctuation:09CMax Capacity:6 x 50ml/16 x 15ml/44 x 1.5-20mlDimensions:(woodxh)29.5 x 21.6x 22.9cm (11.6x8.5x9 in.]Weight:9bs /4kgBlectrical:120V,60HZ or 230V,50Hz,2A 250WOperating environment:20"C to 45"CWarranty:2 years