MDP300PP_使用者说明书手册

Digital Thermometer ModuleFUNCTION:MON/OFFMAX/MIN (F/C)MEMORY RECALLING[HOLD/TESTVFPC[HI/LOW ALARM FUNCTION[RESET[ONE HOUR AUTO SHUT OFF[WATERPROOFFEATURES:[JINTERNAL SENSOR/[J22.5MM/N6OMM/[J133MM EXTERNAL SENSOR PROBE WITH WIRE.[1M/[3M SENSOR WIREEMPERATURE UNIT F/C SELECTABLE[JALARM BEEP SOUND AT THE HIGH OR LOW TEMPERATURE LIMIT[JSTRONG MAGNET FOR EASY ATTACHMENTUC SUCKER ON BACK FOR DIFFERENT APPLICATIONS.1 SECOND NORMAL TEMPERATURE SENSING TIME.LOW BATTERY INDICATOR.PRESENTABLE MAX/MIN TEMPERATURE LIMITSPECIFICATION:●MEASUREMENT RANGE:[-50℃-+70C0R-58℉-+158℉50℃-+150°COR-58℉+302℉[0-50C-+300C0R-58℉+572℉●RESOLUTION:±0.1°FOB-19.9°-+199.9°，OTHERWISE1●ACCURACY:1C IN THE RANGE OF-30PC-+150C.8F IN THE RANGE OF-22PF-+302F[J1C IN THE RANGE OF +151C-+250C,OTHERWISE MORE THAN +2C[J1.8F IN THE RANGE OF +303.8PF-+482F,OTHERWISE MORE THAN 4PF●AMBIENT TEMPERATURE FOR PLASTIC CASE:-10C-+50C OR +14F-+122F●BATTERY:[X 1.5 VOLTS "A76"(LR44,G13)SIZE OR EQUIVALENT.[J1 X 1.5 VOLTS "AAA"SIZE OR EQUIVALENT.INSTALLATION:●UNPACK THE THERMOMETER WITH CAREOPEN THE BATTERY DOOR,INSTALL THE BATTERY INTO THE BATTERY COMPARTMENT CLOSE THEBATTERY DOOR.●REPLACE NEW BATTERY WHEN THE LOW BATTERY INDICATOR APPEARS ON THE SCREEN.OPERATION:PRESS "ON/OFF"FOR POWER SWITCHINGRESS "CPF"TO SELECT DESIRED TEMPERATURE UNIT[PRESS"H/T"FOR FREEZING THE READING FOR RECORDING.[PRESS THE "MAX/MIN"FOR SHOWING THE MAXIMUM OR MININIUM TEMPERATURE READING.THETHERMOMETER WILL GO BACK TO THE NORMAL MODE AUTOMATICALLY AFTER THREE SECONDS.[PRESS "RESET"TO REACTIVATE THE UNIT[ITEMPERATURE ALARM SETTING:PRESS AND HOLD THE "LOW"OR"HI"BUTTON FOR SETTING ALARM AT DESIRED MINIMUMOR MAXIMUM TEMPERATURE LIMIT.THE DISPLAY WILL SHOW-50C OR-58F AND START TO INCREASEUPT0+70C(+15SFOR+150C(+302FOR300C(+572F.RELEASE THE "LOW"OR"HI"TEMPERATURE ALARM SET BUTTON WHEN THE DESIREDTEMPERATURE IS APPROACHED.THE THERMOMETER WILL RETURN TO THE NORMAL MODEAFTER 3 SECONDS.THE ALARM WILL SOUND 4 BEEPS PER MINUTE WHEN THE MEASURED TEMPERATURE EQUALSOR IS GREATER THAN THE MAXIMUM TEMPERATURE OR LESS THAN THE MINIMUM SET VALUE.TO DELETE THE ALARM SET,PRESS CAPF"OR "ON/OFF"BUTTON.PRECAUTIONS:.TO OBTAIN THE BEST RESULTS.THE PROBE TIP SHOULD BE IMMERSED AT LEAST 10MM INTOTHE TESTED SUBSTANCE.(FOR THE MODEL WITH EXTERNAL SENSOR ONLY).REMOVE THE BATTERY FROM THE BATTERY COMPARTMENT IF THE THERMOMETER WILL NOTBE USED FOR LONG DURATION OF TIME OR DURING STORAGE.THE THERMOMETER CANNOT BE USED OR PUT INSIDE ANY OVEN OR MICROWAVE.64ST92810E-03