日本古野FURUNO-ca82b35r_安装调试说明书手册

■■Operator's ManualTRANSDUCER 82B-35RThe 82B-35R is a new transducer with wide bandwidth of 65 kHz-110 kHz,and is useablewith FCV-291/292/1100L/1200L and ETR-30N.It is constructed to provide protection againstslamming.AWARNINGCAUTIONTurn off the power at theDo not install the transducer whereswitchboard beforenoise or air bubbles is present.beginning the installation.Performance will be affected.Electrical shock canresult if the power is left on.The transducer cable must behandled carefully,following theBe sure no water leaks in at the trans-guidelines below.ducer mounting location.Water leakage can sink the vessel.Also,Keep fuels and oils away from theconfirm that the transducer will not loosencable.Locate the cable where it will not beby ship's vibration.The installer of thedamaged.equipment is solely responsible for theproper installation of the equipment.The cable sheath is made of chloro-FURUNO will assume no responsibility forphrene or polychloride vinyl,whichany damage associated with improperare easily by damaged plastic solventssuch as toulene.Locate the cableinstallation.well away from plastic solvents.Do not lift the transducer by itscable.Wires in the transducermay be cut.DIspose of the equipment according toappropriate regulations.FeaturesWhen the transducer is used with the FCV-1100L/1200L,sensitivity remains high even if thefrequency is shifted +10%to suppress interference.The transducer may be installed in the tank of the transducer 88B-10 and 100B-10R.7