日本古野FURUNO-vr7000_安装调试说明书手册(2)

FURUNOVOYAGE DATA RECORDER(VDR)/SIMPLIFIED VOYAGE DATA RECORDER(S-VDR)The pupos逆时能gs0po能eeeraon for fis的ipmert.For moredetsilled informsSon,see0pgo修All bran时ndod过names are trademark线EnglishModelVR-7000/VR-7000SOperator's Guide色时3m格sc地mak等耐erespedive holders.How to turn the power on/off,How to startstop recordingHow to release the Fixed DRUHow to tum the power on then record the data1.Tum off the BATTERY and ACHandle1.Open the DCU door with its key.switches in that order to tum2.On the power control panel in the DCU,tum on the AC and BATTERYoff the DCU power.switches in that order.Confirm that the AC SUPPLY MAINS LED and2.Remove the release pin.BATTERY BACKUP LED on the power control panel light.Data is3.Lift the release lever.automatically recorded in the Fixed DRU*,Float-free DRU*and long4.Lift the handle to separate theterm device.top of the DRU from thebottom of the DRU.Release lever*Select one for VR-7000S.5.Cut the cable connectedRelease pinHow to tum the power off then stop recordingbetween the top and bottomof the DRU.Recording is terminated only under the following condifions:-During essenfial maintenance while the vessel is in port.-When the vessel is laid-up..Tumn off the BATTERY and AC switches in that order.Note:Do not turn off the system from the main breaker while theBATTERY switch is on.If this is done,the system operates on thebatteries.The system stops after running on batteries after two hours.BATTERY BACKUPLED(BATT BACK UP)AC SUPPLY MAINS LED (AC MAINS)AC switchNote:Do not exert force on theopened DCU door.Force canBATTERY switchdamage the door.Data Collecting Unit (DCU)Power control panel