TI388_使用者说明书手册

GENERAL5.When the time setting for the clock is ready,press CLOCKbutton once to return to normal clock display mode.T1388USER'S MANUALNOTE When the timer is running,the correspondingindicator (T1,T2,T3,T4)flashes on the display.All four0000⊙timers can run at the same time.When the timer reaches000go,the buzzer will sound and the comresponding细indicator (T1,T2,T3,T4)will flash relatively slower.Morethan one indicator can flash at the same time.8000●COUNTDOWN TIMER SETTING1.Press T1,T2,T3 or T4 to enter the desired timerDigital Four Channelchannel.In timer mode,the ":"does not flash and theTimer/Clockcoresponding timer indicator "T1","T2","T3"or "T4"shows on the display.Press H to advance the "hour"digits.⊙0⊙0⊙3.Press M to advance the "minute"digits.Press S to advance the "second"digits23细5.Press H,M or S each for 2 seconds to adjust therespective clock setting of the comresponding digits in000©aster increments.6.Press C(CLEAR button)to clear the Countdown TimerCllpBattery Doorand the comresponding timer memory to 000p0.7.Press H and C simultaneously to clear the "hour"digitsPRODUCT FEATURESsetting only.1.Jumbo display 4-channel LCD countdown count-up8.Press the M and C simultaneously to clear the "minute'timer with clock and alarm featuresdigits setting only.2.6-digit display shows hour,minute and second setting9.Press S and C simultaneously to clear the "second"for 4 timers and clock.digits setting only.3.Automatic count-up after timer counts down to zero.4.Countdown timer:Maximum setting is 99 hours,59COUNTDOWN TIMER START/STOPminutes and 59 seconds.Counts down at 1-second1.After the timer setting is ready,press START /STOPresolution.button once.The timer will start to countdown atCount-up timer:Maximum count-up range is 99 hours,1-second resolution.59 minutes and 59 seconds.Counts up at 1-secondPress START /STOP button once to stop theresolution.countdown timer.5.Memory recall function for countdown timer.Press START/STOP button again to resume counting.6.Timer alamm sounds for 1 minute when timer countsdown to zero.COUNTDOWN TIMER ALARMCLOCK MODE1.When the timer counts down to in timer mode.a buzzer will sound.1.Press CLOCK button to enter clock mode.Preset time2.When the timer counts down to 000 go but is not in(hours,minutes and seconds)and flashing colon(:)timer mode,a buzzer will sound and the frequency ofare displayed.2.Press and hold START/STOP button for 3 seconds tothe corresponding indicator flashes relatively slower.3.When two timers countdown to D00m at the sametogglebetween 12/24-hour fommat.time,the timer which shows on display will sound andSETTING THE CLOCKthe indicator for the other timer will flash relativelyslower.1.Press and hold CLOCK button for 3 seconds (until a4.Press any button to stop the timer alamm and thebeep is heard)to enter time setting mode.D0o flashescount-up timer.on the display.The "P"indicator appears if the clock isto be set in 12-hour format.COUNTDOWN MEMORY RECALL2.Press H (HOUR button)to advance the "hou