ASTM_F1511-06船用泵机械密封的标准规范

Designation:F 1511-06An American National StandardNTERNATIONALStandard Specification forMechanical Seals for Shipboard Pump Applications1This standard is issued under the fixed designation F 1511:the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon (e)indicates an editorial change since the last revision or reapproval.1.ScopeA 579/A 579M Specification for Superstrength Alloy Steel1.1 This specification covers mechanical end-face seals forForgingscentrifugal and positive displacement pumps for shipboard use.A 693 Specification for Precipitation-Hardening Stainless1.2 The following types of seals are not included in thisand Heat-Resisting Steel Plate,Sheet,and Stripspecification:lip seals,oil seals,circumferential seals,orA 744/A 744M Specification for Castings,Iron-Chromium-labyrinth seals.Nickel,Corrosion Resistant,for Severe Service1.3 The values stated in inch-pound units are to be regardedB 62 Specification for Composition Bronze or Ounce Metalas standard.The values given in parentheses are mathematicalCastingsconversions to SI units that are provided for information onlyB 127 Specification for Nickel-Copper Alloy (UNSand are not considered standard.A companion hard metricN04400)Plate,Sheet,and Stripstandard is in the process of preparation.B 164 Specification for Nickel-Copper Alloy Rod,Bar,and1.4 Special requirements for U.S.Navy Shipboard PumpWireApplications are included in Supplement S1.B 166 Specification for Nickel-Chromium-Iron Alloys(UNSN06600,N06601,N06603,N06690,N06693,2.Referenced DocumentsN06025.and N06045)*and Nickel-Chromium-Cobalt-2.1 ASTM Standards:2Molybdenum Alloy (UNS N06617)Rod,Bar,and WireA 108 Specification for Steel Bar.Carbon and Alloy.Cold-B 168 Specification Nickel-Chromium-Iron Alloys (UNSFinishedN06600.N06601,N06603,N06690.N06693,N06025A 182/A 182M Specification for Forged or Rolled Alloyand N06045)and Nickel-Chromium-Cobalt-Molybdenumand Stainless Steel Pipe Flanges,Forged Fittings,andAlloy (UNS N06617)Plate,Sheet,and StripValves and Parts for High-Temperature ServiceB 271 Specification for Copper-Base Alloy CentrifugalA 240/A 240M Specification for ChromiumandCastingsChromium-Nickel Stainless Steel Plate,Sheet,and StripB 333 Specification for Nickel-Molybdenum Alloy Plate,for Pressure Vessels and for General ApplicationsSheet,and StripA 276 Specification for Stainless Steel Bars and ShapesB 335 Specification for Nickel-Molybdenum Alloy RodA 313/A 313M Specification for Stainless Steel SpringB 338 Specification for Seamless and Welded Titanium andWireTitanium Alloy Tubes for Condensers and Heat Exchang-A 351/A 351M Specification for Castings,Austenitic,forersPressure-Containing PartsB 348 Specification for Titanium and Titanium Alloy BarsA 436 Specification for Austenitic Gray Iron Castingsand BilletsA 494/A 494M Specification for Castings,Nickel