EN-10219-S275J0H-Steel-Pipe-Specification

Carbon Steel Pipe and Alloy Steel Tube Manufacturers and SuppliersEN 10219 S275JOH Steel Pipe SpecificationEN 10219 S275JOH(BS EN 10219 S275JOH)is a cold-formed hollow section structural carbonsteel pipe,wall thickness s 16 mm minimum yield strength is 275 MPa,impact test at 0Cconditions,to meet the minimum impact strength of 27J.The steel number is 1.0149.女Chemical Componentsby mass,maximumSteel gradeType of deoxidationSpecified thickness(mm)MnPN≤40S275J0H0.201.500.0350.0350.009a The deoxidation methods are designated as follows:FFFully killed steel containing nitrogen binding elements in amournts sufficient to bind available nitrogen(e.g.min 0.020 total Al,or 0.015%soluble Al).b The maximum value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0.020 %with a minimum Al/N ratio of 2-1,or ifsufficient other N-binding elements are present.The N-binding elements shall be recorded in the inspection Document.女Carbon EquivalentSteel gradeMaximum CEV for nominal thicknesses s 40 mm,S275J0H0.40Mechanical PropertiesMinimum yield strength R MPaTensile strength Rn MPaMinimum elongation A.$Minimum impact energy KV .JSteel nameSpecified thickness mmSpecified thickness mmSpecified thickness mmat test temperature ofs16>16s40<323s405400℃52750H275265430-580410-56020d For thicknesses 3 mm see 9.2.2.e For impact properties for reduced section test pieces see 6.7.2.Learn more:EN 10219 S275JOH Structural Steel PipeWhatsApp:008613463768992 Email:sales@botopsteelpipes.com Website:www.botopsteelpipes.com