Motorex-dont-change-from-M5.0-to-M3.0-silicates摩托车驾驶与日常维护保养手册

MOTOREXOil of SwitzerlandINFORMATION REGARDING USE OFCOOLANTS FOR KTM MODELSWITH THE KTM MODEL YEARS 2015 AND 2016 CHANGES REGARDING THERECOMMENDATION OF COOLANTS WILL BECOME EFFECTIVEAs a matter of fact coolants are an essential part of every watercooled engine.In order toensure optimal cooling of the engine specific requirements of the coolant are defined bythe engine manufacturer in close collaboration with the coolant supplier.For the newmodel years KTM together with MOTOREX adjusted these requirements and updates therecommendations as follows:Up to model year 2014Street modelsMOTOREX COOLANT M 5.0Up to model year 2015Offroad modelsMOTOREX COOLANT M 5.0From model year 2015Street modelsMOTOREX COOLANT M 3.0From model year 2016Offroad modelsMOTOREX COOLANT M 3.0All KTM Freeride E modelsMOTOREX COOLANT M 3.0These recommendations will be indicated in the respective owner's manuals accordinglyand need to be observed.MOTOREX COOLANT M 3.0 is a silicate-free coolant which does not form a protectivesilicate layer in the cooling circuit.This helps to reduce the thermal load of the enginesignificantly.A subsequent change from MOTOREX COOLANT M 5.0 to COOLANT M 3.0 is notrecommended as the protective silicate layer may solve which could have a negativeimpact on the flow in the cooling system.Overheating of the engine might be aconsequenceConsequently mixing of the two coolants is not recommended either.MOTOREX Schmiertechnik.Bern-Zirich-StraBe 31.4901 Langenthal.SchweizTelefon:441 (0)62-91975-75.Telefax:+41 (0)62-91975-95.info @motorex.com.www.motorex.com