37955-14-instruction-调试手册说明书指南

SPECIFICATIONSOPERATIONSELECTING ANEMOMETER UNIT OF MEA SURE5.The second press of the REC bumon dsplaysA月Ow-一1.Press the POWER button to turn the meteron1.Press the POWER bucon to tumn the meter onthe minimum reading achieved since enteringRange:0.4 to 30.0 m/s (meters per second)the Record Mode REC MIN will appear onResolution:0.12 Seled the desired display mode (see the2.Select the Anemometer and Temperanurehe dsplayl.Range:1.4 to 108.0 Kimh (ilometers perhour)Dsplay Modes"secton)display mode (see the Display Modes"secton]Resolution:0.16.To retum the dsplay to the current reading.Range:0o5的10PM(feet per minu间3.Take the desired measurements3.Press and hold the HOLD bumon.Aferpress and release the HOLD bution MAX"orResolution:1approximatelythree(③secon达，the display"MIN wil no longer appear on the displayRange:0.9 to 67.0 mph (mlles per hour)4.Press the POWER buton to turn the meter oftwll cycle through the available unts of measureResolution:01To pre serve baterylite,always tum the meter(m/s→Kmh→fPM→mgh→Knd→m/s)7.To exit fom the Record Mode,pressand holdRange:0.8 to583 Knot (naunical mileshour)off when not in useOnce the desired unit of measure appearshe REC bucon for 3 seconds.'REC will noResolution:0.1release the HOLD bumonlonger appear on the display The maximumTe mperature-I no bumon is pressed for ten(10)minutes,theand mini mum reedings are autome bcallyRange:200122.0℉/0.0050.0Cmeter will bum off automancally to preserve ba teryHOLD FUNCTIONcleared once the Recod Mode has beenResolution:0.1*lie (see the"Auomaic Shutotr section)The hold fundion allows the readingson theexited.Humid ity-displayto be"frozen'so that they may beSELEC TING*FOR C (emperature/Dew Point)recorded.AUTOMATIC SHUTOFF(Disable)Range:100o950%RHThe following procedure is used to dhange theIf no buton has been pressed for ten (10)minutes,Resolution:0.1%emperaureldew point display fromF to℃，a1.Press and release the HOLD bumion to 'treeze'the Automanic Shutoff feaure will tum the meter ofDew Pointom℃0Ethe display at the current reading."HOLD willto preserve bamery lfeRange:-135101201℉/2530489℃appear at the top of the displayResolution:0.11.With the meter tumed oft,press and hold theThe automaic shutotf feaure sering is overriddenUpdate Rate:1secondHOLD bumon,then press and release the2.Onoe the reading has been recorded,press andwhile n the Record Mode (See the 'RecordBattery:4 eachAAA(1.5V)POWER bution.release the HOLD bution to return the display toMode"secion)the aument reading.HOLD"will no longerDISPLAY MODES2.Continue to hold the HOLD bution un"0*appear on the display.To disable the Automatic Shuotf feaure,place theThe meter may be set b the following dsplay modes:appears on the displayunit into the Record Mode see the"Record Mode"H-Humidty and TemperatureRECORD MODE (Min/Max Memofes)sei0m】Humidty roa ding shouninthe upp erdisplay,temperature shoun3.Release the HOLD bucon.The meter wllWhle in the Record Mode,the maximum andn he lowc坐由增etun to the sel电cted display mod由and t